Tracing TweetSharePinShare+10 Shares Transforming method using tracing paper 1. Place the butter paper on your fabric. 2. Draw the measurements outlines as per the fabric measurements. 3. Mark safe inside line to protect fabric design pattern to be cut while stitching 4. Draw your required design on the butter paper. 5. If your design same both sides draw one side design fold to the center and you can trace another side easily. 6. Place the pillow or cloth below the butter paper to make holes for tracing. 7. Take a small needle and make holes along with entire design pattern lines. 8. In a bowl take small quantity of tracing powder and pour a little amount of kerosene or turpentine oil (available in hardware shops), mix well until get smooth paste. 9. Hook properly tracing paper and fabric it should not move while transforming design. 10. Take a small sponge dip it in the paste which we have already made. Rub the sponge over the tracing design gently without shaking the paper, repeat the process 5-6 times. 11. Remove tracing paper from the fabric and let it dry, store the butter paper for future use. Rub the sponge over the tracing design gently without shaking the paper, repeat the process 5-6 times. That’s it, Hope you learn.